Ask a quick question about High performance Cable entry shield.
Your quick question has not been sent.
High performance shielding cable entry system 4930
Shielding, grounding and fixing of cables for the entries in your shielded enclosure
Cables to and from the EMI/RFI shielded housing must make 360° contact around the jacket of the shielded cable with the EMI/RFI shielded housing. (for cables without shielding jacket, power- or signal line filters should always be installed, otherwise it works as an antenna.
For throughput of larger numbers of cables and limited space it makes sense to use an EMI/RFI shielded cable entry system. Power and signal cables, as well as water lines and waveguides can be made herein. The electrically conductive beryllium copper contact plate with small pointed fingers makes good contact with the cable shield which guarantees a good shielding performance.
- Also available in fire, gas or watertight version
- The shielding cable entry system can be provided with additional dummy holes on the inside plate and the beryllium copper contact plate. The outer plate remains closed to keep shielding performance high. You can later add more cables by drilling a hole in the outside plate. We will mark the positon of the dummy holes on the outer plate in advance.
- This system enables you to enter a lot of cable in a small area without the indiviual use of (expensive) cable glands.
- Posible with cable diameters from 3 - 28 mm. Other diameters on request.
To get a quick quote please send a list of cable diameters and we will make you a price proposal. You can describe your specifications or the size of the entry plate.
This High performance shielding cable entry system can also be made according to the drawing of the customer.
If you want a quote for a high performance cable shielding system we ask you to send a e-mail to email@example.com.
When you order a high performance shielding cable entry system 4930 series, we ask you to send a drawing to firstname.lastname@example.org. If you do not have a drawing, you can send the dimensions of the plate and the number of cables with cable diameters so we can submit a quotation.
|Series||Height (mm)||Width (mm)||Number of cables||Diameter of the cables (mm)|
Height of the Cable entry shield high performance in mm
Width of the Cable entry shield high performance in mm
Specify the number of cables to be passed through the cable entry shield high performance
Specify the diameter of the cables in mm
|Get a price quotation|
Do you want to receive a price quotation for High performance Cable entry shield within 24 hours, then please click on the right button.