Cable grounding clamps

Cable grounding clamps 4920 series for EMI/RFI shielding and ESD suppression. These clamps can be used as an end piece for cable shields such as the Wrapshield 4730-4760 series or Flexible shielding tube 4800 series.

Cable grounding clamps are perfect for fastening and grounding on EMI/RFI shielded power and signal cables in various applications where electrical connection between the cable and the grounding/EMI/RFI shield circuit is required for EMI/RFI shielding or ESD suppression.

The product is supplied in strips of 1 meter, on rolls or in cutted in desired length. The holes in the strip can be made on any desired position. In the standard strips the distance between the holes is 12 mm. Please see technical drawing below for more details.

4920 series Cable grounding clamps
4920 series Cable grounding clamps

Features

  • Provides simultaneous fastening and grounding for coaxial and braid-shielded cables.
  • Resin base plated with copper foil.
  • High quality materials prevent the clamp from damaging the cable shielding or the insulation sleeve.
  • Excellent flexibility insures constant contact pressure and stable contact resistance under heat variation and heavy vibration conditions.
  • The contact resistance of the highly conductive copper layer is lower than the nickel or chromium plating on the standard metallic clamps.
  • Low weight and space saving solution for dedicated cable grounding.

Specifications

  • Material:
    • Conductive textile inside
    • Flammability rating - UL94-V0
    • Mu-copper foil outside
    • Thickness: 0.03mm (0.001 inch.)
  • Best mounting method:
    • M3 (Size 4) screw

Mounting method

Step 1: Cut the strip into pieces of desired length (Only required when the product is delivered as strip)
Step 1 : Cut the strip into pieces of desired length (Only required when the product is delivered as strip)
Step 2: Lay the cut piece (Grounding cable clamps) over the cable
Step 2 : Lay the cutted/trimmed piece (Grounding cable clamps) over the cable
Step 3 : Fold the Grounding cable clamps around the cable
Step 4 : Do a bolt through the holes to fix the Grounding cable clamps

Technical drawing

Cable grounding clamb technical drawing
Technical drawing
Technical drawing for at the
Technical drawing for at the "Order example"

To get a quotation for Cable grounding clamps within 24 hours fill in the form below.

Part number
Strip/pieces
Please specify if you want to order as strip of 1 meter (S) or as pieces (P) cutted in length
Length (mm)
When you order in pieces then specify the length per piece in mm
* Note: The red blocks are required

Give us feedback?

Visit our old website