4700S - Ready-made cable-shielding sleeve

We have developed cost-effective EMI protection for flat cables. This is an easy way to protect sensitive sources from interference.

The ready-made sleeve (EMI-screening sleeve) for flat cables allows easy cable routing during assembly. The material is a highly conductive Amucor film offering full 360° protection against electromagnetic radiation. Shielding performance can even be improved using optional grouding connections.

For placing or curving flat cables there is an ultra flexible solution with conductive textile with a self-adhesive, combining suberb mechanical and EMI-screening properties. The sleeve is also available for round cables with a diameter up to 45mm. The product can be supplied in rolls of up to 100 meters.

Ready-made sleeves can be supplied in Amucor or in Conductive textile (fabric). The material provides high shielding performance. The ready-made sleeve is used for cables with large diameters and flat cables and can be produced with a self-adhesive backing so that the EMI shielding remains securely in place.


Part numbers

  • 4701S : Reinforced Amucor foil
  • 4702S : Reinforced Amucor foil + self-adhesive
  • 4711S : Conductive fabric
  • 4712S : Conductive fabric + self-adhesive
  • 4713S : Conductive fabric + conductive self-adhesive

Grounding connection (optional)

On request, we can make the cable shield completely customized, for example, a connection to earth but also other special shapes and sizes are available on request. Please send your drawing to the desired performance to info@hollandshielding.com or use our contact form on the website.

4701S Ready-made sleeve with grounding connections made from reinforced Amucor foil
Example image of 4701S Ready-made sleeve with grounding connections made from reinforced Amucor foil
Ready made sleeve for flat cable shielded. The sleeve is made from Amucor foil
Ready-made sleeve for flat cable. The sleeve is made from Amucor foil
4711S Ready-made sleeve made from conductive fabric
4711S Ready-made sleeve made from conductive fabric

Standard widths

Width range (mm) Part number
3-5 4701S-2-5
5-8 4701S-2-8
8-12 4701S-2-12
12-15 4701S-2-15
15 -18 4701S-2-18
18 -22 4701S-2-22
22-25 4701S-2-25
25-30 4701S-2-30
30- 35 4701S-3-35
35-40 4701S-3-40
40-45 4701S-3-45
45-50 4701S-3-50
50-60 4701S-3-60
60-70 4701S-3-70
70-80 4701S-3-80
80-90 4701S-3-90
90-100 4701S-3-100

*Any other width available upon request, without tooling costs


Shielding performance (dB)

Frequency
MHz
ModeAttenuation dB
Amucor
Attenuation dB
Conductive textile
1M E 121 115
10M E 110 108
100M E 103 102
400M E 98 92
1G P 93 90
10G P 90 87
These values are measured under laboratory conditions.
In other situations results may differ; please read our Guarantee.

Article on EETimes

Flat Cable Shielding Sleeve - EMI protection for the weakest spot
Electronics Express Europe


Flat cable connector shield

When your flat cable has a connector, it may be of importance for achieving the desired shielding effect to also shield the connector. We have developed a flat cable connector shield that is very easy to be stuck to any connector of a flat cable. With this shield the cable including the connector can be fully shielded to get the best shielding performance.

When the 4700S series Ready made sleeve is combined with the 8210 series Flat cable connector shield the cable will be fully shielded
When the 4700S series Ready made sleeve is combined with the 8210 series Flat cable connector shield the cable will be fully shielded

Learn more


Order example technical drawing

Cable shielding | Ready made sleeve
Technical drawing: How to specify the length and width of the ready-made cable shield
EMI protection for flat cables. Ready-made EMI screening sleeves for cables EMI protection for flat cables. Ready-made EMI screening sleeves for cables Holland Shielding Systems B.V. Holland Shielding Systems B.V.
Rated 4.5/5 based on 8 customer reviews
In stock
Product description: Ready-made sleeves can be supplied in Amucor or in conductive fabric. The material provides high shielding performance. Cable shielding, ready made sleeve

General documentation

To get a quotation for Ready-made sleeve within 24 hours fill in the form below.

Part number
Select an option:
4701S : Reïnforced Amucor foil
4702S : Reïnforced Amucor foil + self-adhesive
4711S : Conductive fabric
4712S : Conductive fabric + self-adhesive
4713S : Conductive fabric + conductive self-adhesive
Height (mm)
Specify the height of the cable in mm
Width (mm)
Specify the width of the cable in mm
Length (mm)
Specify the lenght per sleeve
Insulation
Select an option:
I : Inside
O : Outside
* Note: The red blocks are required

4965

High performance EMC cable glands

3208

Mu-ferro tape

4910

Entry shield

4930

High performance Cable entry shield

4800

Flexible shielding tube

2400

Twisted fingerstrips