8000 series Endless gasket

Combined EMI-shielding and water-seal gasket for grooves and door/lid constructions

Endless gasket 8000

The 8000 series Endless gaskets are ready-made gaskets according to customer specifications. They are suitable for many applications in which both an EMI-shielding gasket and a water seal are required.

The 8000 series Endless gasket consists of a rectangular EMI gasket like Amucor shield 6800 seriesStandard shield 7000 series or Ultra soft shield 7400 series, combined with a closed-cell water seal.

All gaskets can be provided with a self-adhesive strip for easy mounting. Gasket materials for the 8000 series Endless gaskets are watertight at 30% compression, depending on the construction.


Options

  • UL94V-0 flame-retardant foam core
  • Chemical-resistant rubbers like EPDM
  • Silicone sponge for high temperatures up to 220 ºC
  • Available in conductive textile, Amucor or Knitted wire mesh versions

Benefits

  • Easy mounting
  • High shielding performance
  • No tools required
  • Dimensions up to 2 x 2 m

IP seal position

The gasket can be supplied with the water sealing/IP seal on the outside of the gasket (IP seal position O), or with the water seal at the inner side of the gasket (IP seal position I).

Example image of a 8000 series Endless gasket with the waterseal on the ouside of the gasket and holes for mounting
Example image of a 8000 series Endless gasket with the waterseal on the ouside (IP seal position O) of the gasket and holes for mounting.
Endless gasket made of Amucor shield 6800
8000 series Endless gasket made of 7000 series Standard shield with a Neoprene water seal
8000 series Endless gasket made of 7000 series Standard shield with a Neoprene water seal on the inside (IP seal position I)
8000 series Endless gasket made of 7000 series Standard shield with a Neoprene water seal on the inside (IP seal position I)

Compression stops

Disc or washer-type compression stops can be included to prevent overcompression.

Compression Stops
Washer type
used at bolt holes
Compression Stops
Disk type
used next to bolt holes

Various uses

Examples of different uses for the Endless gasket
(the solid grey part is the water seal)

Endless gasket used in a flat lid on a curved housing constuction
1. Endless gasket used in a flat lid on a curved housing constuction
Endless gasket used in a curved lid on a curved housing constuction
2. Endless gasket used in a curved lid on a curved housing constuction
Endless gasket used in a flat lid on a curved housing constuction
3. Endless gasket used in a groove

Technical drawing standards

Drawing Endless Gasket 8000 | EMI gasket with endless waterseal
If you send us a drawing, please include the dimensions shown above.
A : Width (mm)
B : Height (mm)
R : Corner radius (mm)
Drawing Endless Gasket 8000 | EMI gasket with endless waterseal
Section S-S
Z : Width of the waterseal (mm)
X : Width of the EMI gasket (mm)
Y : Height of the EMI gasket (mm)
Endless EMI Gasket 8000 serie | EMI gasket with endless waterseal
Photograph of the 8000 Endless gasket to compare with the technical drawing above
8000 Endless Gasket | Holland Shielding Systems BV 8000 Endless Gasket | Holland Shielding Systems BV Holland Shielding Systems B.V. Holland Shielding Systems B.V.
Rated 4.3/5 based on 14 customer reviews
In stock
Product description: Suitable for many applications in which both an EMI-shielding gasket and a water seal are required. EMI gasket combined with closed-cell water seal

General documentation

To get a quotation for Endless gasket (EMC/IP) within 24 hours fill in the form below.

When you want a 8000 series Endless gasket 200 x 100 mm, with a neoprene core and a neoprene waterseal, with standard adhesive, IP seal in the inside of the gasket, waterseal width of 4mm, EMI gasket width of 4mm and a gasket height of 4mmthe part number should be 8000-200-100-N-N-01-I-4-4-4

Part number
Select an option:
8000 : Endless gasket Amucor version
8001 : Endless gasket Conductive textile version
8002 : Endless gasket Knitted wire mesh version
Width (mm) A
Specify the width of the gasket in mm
Height (mm) B
Specify the height of the gasket in mm
Material (EMI gasket core)
Select an option:
N : Neoprene
P : Low closure force PVC foam
E : EPDM
F : Flame retardant UL94V-0 foam
S : Silicone foam
L : Polyurethane foam (ultra soft)
Material (waterseal)
Select an option:
N : Neoprene
S : Silicone
Adhesive
Select an option:
01 : Standard self-adhesive
02 : Without self-adhesive
03 : With conductive self-adhesive
IP seal position
Select an option:
I : Inside gasket
O : Outise gasket
Width of waterseal (mm) Z
Specify the width of the waterseal in mm
Width of EMI gasket (mm) X
Specify the width of the EMI gasket in mm
Height of EMI gasket (mm) Y
Specify the height of the gasket in mm
* Note: The red blocks are required
Acceptable file extensions (prefered a PDF file)
.ai, .bmp, .cad, .doc, .docx, .dwf, .dwg, .dxf, .dxt, .eps, .gif, .icd, .idw, .ipn, .ipt, .jpeg, .jpg, .pdf, .png, .ppt, .pptx, .psd, .rar, .step, .svg, .tif, .tiff, .xls, .xlsx, .zip

2700

Contact fingers

2600

Circular fingersrips

3670

PU foam based wedge absorbers

Protective coverall

Faraday cage doors

Prefabricated Faraday cages