EMI/RFI shielded Faraday tent

Do you have a quick question about Shielded tents Click here.

Close X

Ask a quick question about Shielded tents.

Your quick question has not been sent.

    Your question

    Do you have a quick question about Shielded tents Click here. Print this page

    Cost effective instant Faraday tent

    The EMI/RFI shielded Faraday tents are manufactured from strong and highly conductive textile. The Faraday tents are standardly delivered with multiple ropes for easy mounting to the ceiling or with a self-standing frame. Applications are typically EMC experiments, RF measurements, mobile military / forensic activities and personal protection in the field. Faraday tents offer mobile solutions for only a fraction of the price compared to a conventional Faraday cage.



    Faraday tent | EMI shielded tent

    Visual contact

    NEW: Maintain visual contact with your experiment

    A double layer of fine conductive mesh can be
    installed allowing you to maintain visual contact between
    the inside or outside of the tent.


    Protective clothing

    From the same material as used for our Faraday tents we can make electromagnetic shielded clothes. Click here for more information

    Setting up the Faraday tent

    Setting up the Faraday tent goes fast and is very easy.

    Standard the Faraday tent is supplied with ropes, so that the tent can be hang to the ceiling.
    Optionally the Faraday tent can be delivered with easy mounting frame and/or plastic locks as shown in the picture below. In a double layer Faraday tent it's easy with the plastic locks to connect/hang the inner Faraday tent to the outer Faraday tent.

    Faraday tent to frame connection Inner Faraday tent to outer Faraday tent connection

    Access the shielded Faraday tent

    Typically the access point is made out of magnetic strips covered with electrically conductive layers of textile. The magnetic closure ensures superb electrical contact after the tent is closed. When necessary, the entrance can also be equipped with conductive Velcro strips.


    Faraday tent | EMI shielded tent

    Faraday tent with aluminium mounting frame



    Our RFI/EMI shielding tents are made of highly
    conductive, lightweight and ultra strong textile.


    Shielding performance of tents (dB)

    Faraday tent shielding performance

    These values are measured under laboratory conditions.
    In your situation results may differ, please read our Guarantee.


    • Computer and Cell Phone Forensics
    • Military Field / Embassy use
    • Secure / TEMPEST communication
    • Radar jammer protection
    • Electromagnetic Allergy / Electro smog
    • Pre-compliance Testing
    • Temporary EMI Shielding
    • Reverberation chamber (RVC)
    • Mode-stirred chamber (MSC)


    • Easy to mount and move, mobile laboratory
    • Any size possible
    • Optionally supplied with a rigid reinforced floor
    • Single layer Faraday tent 40-60 dB up to 22.5 GHz
    • Double layer Faraday tent 70-90 dB up to 22.5 GHz


    • Rigid floor for heavy load
    • Easy mounting frame
    • Shielded power filters
    • Shielded ventilation/ AC
    • Cable sleeve for entry of filtered cables
    • Many other options on request

    Standard available sizes:
    All measurements given in the table are outside dimensions


    Type Size Ordering code
    Small 1 x 1 x 2.3 meters P-100x100x230
    Medium 2.5 x 2.5 x 2.3 meters P-250x250x230
    Large 3 x 3 x 2.3 meters P-300x300x230


    Type Size Ordering code
    Small 2 x 2 x 2.3 meters S-200x200x230
    Medium 2.5 x 2.5 x 2.3 meters S-250x250x230
    Large 3 x 3 x 2.3 meters S-300x300x230


    Type Size Ordering code
    Large 2.5 x 3 x 2.3 meters R-250x300x230
    Extra large 3 x 2 x 2.3 meters R-300x200x230


    Type Size Ordering code
    Small Ø2 x 2.3 meters O-200x230
    Medium Ø4 x 2.3 meters O-300x230
    Large Ø4 x 2.3 meters O-400x230


    Type Size Ordering code
    Size 5 x 3 x 4 meters J-500x300x400

    Any other size on request

    Most sizes are in stock: please contact us for delivery time.


    Our Faraday tents on BBC news

    Our Faraday tents on BBC news

    Read an article about our Faraday tents on BBC news



    Movie of a shielding bag made of fabric that is used for windows in a tent




    Order example
    Rectangular tent, 2 x 3 x 2.3 meters and single layers version.

    Part number Shape Length (cm) Width (cm) Height (cm) Layers
    Shielded tent
    P : Pyramid
    S : Square
    R : Rectangular
    O : Round
    J : Jumbo tent
    The length of the tent in centimeters
    The width of the tent in centimeters
    The height of the tent in centimeters
    Specify a
    single layer (1) or a
    double layer (2) tent

    Get a price quotation
    Do you want to receive a price quotation for Shielded tents within 24 hours, then please click on the right button.
    Quick product selection
    Choose your product...

    Close X

    Download documentation
    Here you can download datasheets of EMI/RFI shielded Faraday tent.
    The language of this document is English
    Online catalog
    Online EMI/RFI shielding product catalog