EMI/RFI-shielded Faraday tent

Cost-effective instant Faraday tent

The EMI/RFI-shielded Faraday tents  are made of highly conductive, lightweight, and ultra-strong textile. By default the Faraday tents are delivered with multiple ropes so they can be easily attached to a ceiling, or they can come with a self-standing frame.

Typical applications are EMC experiments, RF measurements, mobile military or forensic activities, and personal protection in the field. Faraday tents offer a mobile solution for only a fraction of the cost compared to a conventional Faraday cage.


  • Computer and cell-phone forensics
  • Military field or embassy use
  • Secure or TEMPEST communication
  • Radar-jammer protection
  • Electromagnetic allergy / electrosmog
  • Pre-compliance testing
  • Temporary EMI shielding
  • Reverberation chamber (RVC)
  • Mode-stirred chamber (MSC)


  • Easy to mount and move, mobile laboratory
  • Any size possible
  • Optionally supplied with a rigid reinforced floor
  • Single-layer Faraday tent: 40-60 dB up to 22.5 GHz
  • Double-layer Faraday tent: 70-90 dB up to 22.5 GHz

Shielding performance (dB)

Faraday tent shielding performance
Faraday tent shielding performance

These values are measured under laboratory conditions.
In other situations results may differ; please read our Guarantee.

Example image of a Faraday tent aka EMI shielded tent with a rigid floor for heavy load
Faraday tent a.k.a. EMI-shielded tent with a rigid floor for heavy loads
Example image of a pyramid shaped Faraday tent with a single rope to hang to the ceiling
Pyramid-shaped Faraday tent with a single rope to attach to the ceiling

Additions (on request)

Faraday tent options

As illustrated in the technical drawing above, our Faraday tents can be supplied with the following options:

  • Rigid floor for heavy load
  • Shielded ventilation mesh / AC
  • Cable sleeve for entry of filtered cables, Ø80 mm
  • Shielded mesh window for visual contact
  • Standard closure with magnet strips
  • Power-line or signal-line filter according to your specifications
  • Many other options on request

Mounting options

Faraday tent mounting options

Our Faraday tents can optionally be supplied with a mounting frame so they can easily be set up as a stand-alone structure almost anywhere, but they are usually supplied with mounting ropes to attach to a ceiling. Mounting ropes are generally used when the Faraday tent is installed inside a building in a permanent location.

Standard sizes / shapes

We have a number of Faraday tents in standard sizes and shapes in stock. In addition, almost any size and shape can be made on request. Feel free to send us a technical drawing of the desired Faraday tent. Sample drawings can be found under Technical drawings on this page.

Please note : All measurements given in the tables below are outer dimensions

Faraday tent shapes


TypeSizeOrdering code
Small 1 x 1 x 2.3 meters P-1x1x2.3
Medium 2.5 x 2.5 x 2.3 meters P-2.5x2.5x2.3
Large 3 x 3 x 2.3 meters P-3x3x2.3


TypeSizeOrdering code
Small 2 x 2 x 2.3 meters S-2x2x2.3
Medium 2.5 x 2.5 x 2.3 meters S-2.5x2.5x2.3
Large 3 x 3 x 2.3 meters S-3x3x2.3


TypeSizeOrdering code
Large 2.5 x 3 x 2.3 meters R-2.5x3x2.3
Extra large 3 x 2 x 2.3 meters R-3x2x2.3
Jumbo 5 x 3 x 4 meters R-5x3x4


TypeSizeOrdering code
Small Ø2 x 2.3 meters O-2x2.3
Medium Ø3 x 2.3 meters O-3x2.3
Large Ø4 x 2.3 meters O-4x2.3

* Any other size on request
* Most sizes are in stock; please contact us for delivery time.

Below you can find further details concerning our Faraday tents

How to set up the Faraday tent

Setting up the Faraday tent takes little time and is quite easy.

The standard Faraday tent is supplied with ropes, so that the tent can be suspended from the ceiling. Optionally the Faraday tent can be delivered with a convenient mounting frame and/or plastic locks as shown in the picture below. With the plastic locks on a double-layer Faraday tent it is easy to connect the inner Faraday tent to the outer one.

Faraday tent to frame connection
Faraday tent, connection to frame
Inner Faraday tent to outer Faraday tent connection
Connection of inner Faraday tent to outer Faraday tent

Protective clothing

Out of the same material that is used for our Faraday tents, we can also make electromagnetically shielded clothes. Click here for more information.

Protective clothing
Protective clothing

Our Faraday tents on BBC news

Video clip of a shielding pouch made of conductive wire mesh intended for Faraday-tent windows


Faraday tent | EMI/RFI-shielding tent | Instant Faraday cage Faraday tent | EMI/RFI-shielding tent | Instant Faraday cage Holland Shielding Systems B.V. Holland Shielding Systems B.V.
Rated 4.3/5 based on 9 customer reviews
In stock
Product description: Faraday tents offer a mobile solution for only a fraction of the cost compared to a conventional Faraday cage. Mostly used for military/forensic activities

Would you like to...

Technical datasheets

To get a quotation for Shielded Faraday tents within 24 hours fill in the form below.

If you would like a quotation for a shielded tent, please fill in the following blocks. For example you can choose a rectangular shielded tent that is 2.3 m long, 3 m wide and 2.3 m high, in a single-layer version (Shielded tent-R-2.3-3-2-1)

Select an option:
P : Pyramid
S : Square
R : Rectangular
O : Round
Length (m)
The length of the tent in meters
Width (m)
The width of the tent in meters
Height (m)
The height of the tent in meters
Select an option:
1 : Single layer
2 : Double layer
* Note: The red blocks are required