Determine the type of fingerstrip you need

By following these steps, you can easily determine which fingerstrip you need for your application


1. Proper size

Determine the correct size of the mounting area (See Figure 1.)


2. Dynamic range of compression

Each shielding gasket is compressed to a certain distance, depending on the design. A positive contact force can usually be assured when the gaskets are compressed up to 25% of their relaxed height or more.


3. Attachment methods

With the Holland Shielding Systems BV standard configuration there are the following mounting methods:

For more information see Figure 2.


4. Correct orientation

Many of the Holland Shielding Systems BV gasket designs depend on the active contact surface (top) being engaged at, or behind, the cross-sectional centre line. To assure the proper angle of engagement, the guidelines below should be followed for best results.

Retaining lances for clip-ons

Most clip-on styles are available with retaining lances which enhance the spring grip onto the mounting surface.

Adhesive tape specifications

Holland Shielding Systems BV Shielding designs incorporate two types of adhesive tape on many of the gaskets.

Instant tac adhesive

Application: for areas where the two opposing surfaces can be connected by contacting at least one point of the shielding gasket's profile on each surface.

Temperature range: -50 °F (-46 °C ) to +300 °F (+149 °C)

Conductive tac adhesive

Application: for areas where the two opposing surfaces can be connected by contacting one point of the shielding gasket's profile on one side and Conductive tac on the other.


Temperature range: -50 °F (-46 °C ) to +300 °F (+149 °C)

Determine Proper Size
Fig. 1. Determine the width of the mounting area
Attachment Methods
Fig. 2. Attachment methods
Correct Orientation
Test
Retaining Lances for Clip Ons
Test
Instant Tac Adhesive
Test
Conductive Tac Adhesive
Tthe correct way to exert force on the fingerstrip

 

2000 series Fingerstrips | Holland Shielding Systems BV Holland Shielding Systems BV 2000 series Fingerstrips | Holland Shielding Systems BV Holland Shielding Systems B.V. Holland Shielding Systems B.V.
Rated 4.6/5 based on 11 customer reviews
In stock
48.00 48.00 999999.00 EUR
48.00 48.00 999999.00 Quotation EUR
1 2000 series Fingerstrips | Holland Shielding Systems BV Holland Shielding Systems BV
Product description: Very handy for ESD grounding or RFI/EMI shielding on enclosure doors & panels, chassis covers, back panels, rack drawers and plug-in assemblies

Holland Shielding Systems BV

Holland Shielding Systems B.V. Holland Shielding Systems BV Holland Shielding Systems BV

Worldwide leading manufacturer of EMC (electromagnetic compatibility), EMI (electromagnetic interference) and RFI(radiofrequency interference) shielding solutions. Our EMC/EMI specialists will work together with you from the design phase through final production.

Open: Monday-Friday 7am-12pm

Phone: +31(0)78-2049000

Fax: +31(0)78-2049008

Paypal, credit card, iDEAL, Cash, Wire transfer From €48
Jacobus Lipsweg 124, 3316BP, Dordrecht, ZH, NL
Rated 4.9/5 based on 346 customer reviews

Would you like to...