Ultra soft twin shield 7800 series

EMI/RFI shielding gasket with low closure force to prevent bending of doors, lids and panels combined with a environmental seal (dust/water seal)

Ultra soft twin shield 7800 series is a range of HF gaskets similar to our Ultra soft shield 7400, which have been combined with an environmental seal (also known as water seal) made of closed-cell foam rubber. The product requires very low closure force. All gaskets are provided with a self-adhesive strip on the side of the water seal.

The standard material for the water seal is neoprene foam. Alternatively a slowly recovering PVC foam is available, which is fully watertight at 30% compression.

Ultra soft twin emi shield 7800
Ultra soft twin emi shield 7800

Shielding performance

Shielding effectiveness depends on surface, shape of gasket and material used.

Frequency
HZ
ModeScreening
dB
1M E 115
10M E 108
100M E 102
400M E 92
1G P 90
10G P 87
These values are measured under laboratory conditions.
In other situations, results may differ; please read our Guarantee.

Standard dimensions

7800 Ultra soft twin shield technical drawing
7800 Ultra soft twin shield technical drawing
ZXYPart number
1 mm 2 mm 2 mm 78-1+2-2
2 mm 3 mm 3 mm 78-2+3-3
2 mm 4 mm 4 mm 78-2+4-4
3 mm 6 mm 6 mm 78-3+6-6
3 mm 9 mm 6 mm 78-3+9-6
3 mm 9 mm 9 mm 78-3+9-9
4 mm 12 mm 12 mm 78-4+12-12
5 mm 14 mm 14 mm 78-5+14-14
5 mm 16 mm 16 mm 78-5+16-16
5 mm 18 mm 18 mm 78-5+18-18
6 mm 20 mm 20 mm 78-6+20-20
6 mm 22 mm 22 mm 78-6+22-22
6 mm 24 mm 24 mm 78-6+24-24
Other dimensions on request

Tape specification

  • 01 : standard self-adhesive, asymmetrical
  • 02 : without self-adhesive
  • 03 : conductive self-adhesive

Foam specification


Benefits

  • Deflection up to 80%
  • Very low closure force
  • Very high electrical conductivity
  • High shielding performance
  • Roll lengths of 1 to 1000 meters, depending on width and height of the gasket
  • Easy to fit, self-adhesive
  • High abrasion resistance
  • Tools required: a pair of scissors

Options

  • Cut into accurate lengths
  • UL94V-0 flame-retardant foam core
  • Chemical-resistant rubbers like EPDM
  • Silicone sponge for high temperatures up to 220 °C
  • Different conductive foils and fabrics
Ultra Soft Twin Shield 7800 serie | EMI/RFI shielding gasket with waterseal Ultra Soft Twin Shield 7800 serie | EMI/RFI shielding gasket with waterseal Holland Shielding Systems B.V. Holland Shielding Systems B.V.
Rated 4/5 based on 9 customer reviews
In stock
Product description: A combined HF gasket / water seal with very low closure force for DOORS: gaskets with low closure force to prevent bending of doors, lids and panels

General documentation

To get a quotation for Ultra soft twin shield within 24 hours fill in the form below.

For example Ultra Soft Twin shield 7800, 6 mm width (2 mm width waterseal + 4 mm width EMI seal) x 4 mm height, standard self-adhesive, with Neoprene foam water seal: 78-2+4-4-01-N.

Series
Width Z+X (mm)
Specify the width of the EMI gasket and the waterseal with a + between. For example a 1 mm width waterseal and 2 mm width EMI seal will be 1+2
Height Y (mm)
Specify the height of the gasket in milimeters
Adhesive
Select an option:
01 : Standard self-adhesive, asymmetrical
02 : Without self-adhesive
03 : Conductive self-adhesive
Foam specifications
Select an option:
P : Low closure force PVC foam
N : Neoprene foam
E : EPDM foam
F : Flame retardant UL94V-0 foam
* Note: The red blocks are required

4700R

Flexible cable shield

IECLF375

Power line filter with integrated 2-pole switch and 2 fuses

1900

EMI housings/enclosures

Shielded sleeping bags

8040

Power line filters for ground wire

TC

Tiny clip (for 1500 series)