5711 through 5722 - Oriented wire shield

Silicone sheet material with oriented wires for EMI shielding and IP sealing. Can be cut into complicated shapes by CNC knife cutting, laser cutting and/or water jet cutting, or die-cut

Oriented wire shield 5711 - 5722 is a composite gasket material consisting of a large number of small wires embedded and bonded in solid or sponge silicone, or fluorosilicone elastomer for oil resistance.

The wires provide excellent conductivity to establish EMI / RFI shielding. 

The material is used in military, industrial and commercial products requiring EMI suppression, grounding, or static discharge. It is very suitable for applications where an environmental or pressure seal is required.

The sponge version is used in cases where the severe joint is uneven, or if lower closure forces or greater compressibility are required.


Technical drawing

Oriented wire shield (Wire filled sillicone) is made of silicone filled with very small electrically conductive metal wires
Oriented wire shield (wire-filled silicone) is made of silicone filled with very small electrically conductive metal wires

Dimensions

We produce sheets of 150 x 900 mm, from which we can then cut gaskets without interruptions. Bigger gaskets can be welded/joined together in order to prevent waste of material.

Custom compositions are available on request, simply by sending a drawing with the desired dimensions to our email address info@hollandshielding.com.


Benefits

  • Temperatures up to 220°C
  • High shielding performance
  • Water sealing up to 10 meters
  • Pressure resistant
  • Salt spray / chemical resistant
  • Fluorosilicone rubber for fuel/oil resistance
  • Supplied as sheets, strips or die-cuts

Technical specifications

Colour Grey silicone
Elastomer Silicone or fluorosilicone
Conductive filler   Monel wire, aluminium wire
ROHS compliance Yes
Corrosion resistance Yes
UV resistance Yes
Oil resistance Fluorosilicone type only
Fuel resistance Fluorosilicone type only
IP rating Yes
Oriented wire shield for  EMI shielding and IP sealing
Oriented wire shield for  EMI shielding and IP sealing
Oriented wire shield can be supplied with various metal wires material in order to prevent galvanic corrosion
Oriented wire shield can be supplied with various types of metal wires in order to prevent galvanic corrosion
Oriented wire shield can be supplied on a roll of 900 mm length
Oriented wire shield can be supplied on a roll of 900 mm length
Oriented wire shield can be CNC cut according to your drawing into any desired shape and size
Oriented wire shield can be CNC cut according to your drawing into any desired shape and size

Conductive adhesive (conductive PSA)

PropertyUnit Outcome Test method
Surface resistanceΩ/sq <0.10 MIL-DTL-83528C
Adhesive strengthg/25mm 850 ASTM D 3330
Conductive PSA- Acrylic + Ni -
Liner- paper, film -

Part numbers

MaterialPart number
Solid silicone with monel wire 5711
Solid silicone with aluminium wire 5712
Solid fluorosilicone with monel wire 5713
Sponge silicone with monel wire 5721
Sponge silicone with aluminium wire 5722

Available thicknesses

0.81, 1.13, 1.38, 1.57, 2.40, 3.18, 3.96, 4.78, 6.35 mm.
Other thicknesses on request.


Technical specifications

MaterialSolid silicone
with monel wire
5711
Solid silicone
with aluminium wire
5712
Solid fluorosilicone
with monel wire
5713
Sponge silicone
with monel wire
5721
Sponge silicone
with aluminium wire
5722
Colour Grey Grey Blue Grey Grey
Wire count/ sq.inch 900 900 900 900 900
Compression set 25% 25% 25% 25% 25%
Closing force (psi) 25-100 25-100 25-100 5-50 5-50
Fuel/solvent resistant No No Yes No No
Temperature (°C) -65/200 -65/200 -55/200 -65/200 -65/200

Shielding performance (dB)

In deze container wordt op de website een grafiek ingeladen.
Deze container niet bewerken s.v.p.
Grafiek: 5711 series - Oriented wire shield (25)
Grafiek legenda

Please note : These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee.

Oriented Wire Shield, Wire-filled silicone for EMI shielding and IP seal Oriented Wire Shield, Wire-filled silicone for EMI shielding and IP seal Holland Shielding Systems B.V. Holland Shielding Systems B.V.
Rated 4.8/5 based on 8 customer reviews
In stock 999
Product description: Silicone sheet material with oriented wires for EMI shielding and IP sealing; can be cut into shapes by CNC knife, laser, or water jet, or die-cut.

To get a quotation for Oriented wire shield within 24 hours fill in the form below.

When you want a quotation for a rectangular piece Flatshield 5700 series please specify part number and dimensions according to the blocks below. For a specific shape please enclose a detailed drawing.

Series
Select an option:
5711 : Solid silicone with Monel wires
5712 : Solid silicone with aluminium wires
5713 : Solid fluorsilicone with Monel wires
5721 : Sponge silicone with Monel wires
5722 : Sponge silicone with aluminium wires
Width (mm)
Specify the desired width in mm
Length (mm)
Specify the desired length in mm
Thickness
Select an option:
0.81 : 0.81 mm thick
1.13 : 1.13 mm thick
1.38 : 1.38 mm thick
1.57 : 1.57 mm thick
2.40 : 2.40 mm thick
3.18 : 3.18 mm thick
3.96 : 3.96 mm thick
4.78 : 4.78 mm thick
6.35 : 6.35 mm thick
* Note: The red blocks are required
Acceptable file extensions (prefered a PDF file)
.ai, .bmp, .cad, .doc, .docx, .dwf, .dwg, .dxf, .dxt, .eps, .gif, .icd, .idw, .ipn, .ipt, .jpeg, .jpg, .pdf, .png, .ppt, .pptx, .psd, .rar, .step, .svg, .tif, .tiff, .xls, .xlsx, .zip

5750-S

Conductive rubber sheets

Amucor Faraday cage

3200 series

Mu-copper tape

4700 series

Amucor tape

6500

Clip-on gasket all shapes