1400 series Miniature EMI / RFI shielding gaskets

This is a very small EMI / RFI shielding gasket, used for EMI / RFI shielding, for example for PCBs, smartphones and other applications where there is little space.

This EMI/RFI gasket can be made so narrow that the height exceeds the width. Nevertheless, it provides sufficient electromagnetic damping.


Applications

  • Shielding on printed circuit board (PCB)
  • EM, RF, LF, HF, EMI, RFI shielding
  • Other products where there is very little space available and low compression force is required

The gasket is made of a highly electrically conductive foam with or without an electrically conductive self-adhesive strip on one side. The electrically conductive foam can be compressed up to more than 50 % of its original height.

The smallest width is 1 mm and the maximum height is 6 mm. Roll lengths of 1 to 1000 meters, depending on width and height of the EMI gasket.


Options

  • EMI/RFI miniature gasket with water seal
  • Resistant to high temperatures
  • With cooling holes
  • With or without self-adhesive
  • Made from electrically conductive foam or electrically conductive rubber
  • Electrically conductive rubber version for chemical resistance
Miniature EMI / RFI shielding gaskets
Miniture EMI / RFI shielding gasket, narrower than a matchstick
Miniature EMI / RFI shielding gaskets with conductive textile or amucor
Miniture EMI / RFI shielding gasket with Amucor foil or textile cover
Miniature shield with self-adhesive back and even with water seal
Miniature shield with self-adhesive backing, made of electrically conductive foam and a version with water seal

Standard dimensions

Width X (mm)
Height
Y
(mm)
  1.0 1.5 2.0 2.5 3.0 3.5 4.0
1.5 141015 141515 142015 142515 143015 143515 144015
2.2 141022 141522 142022 142522 143022 143522 144022
3.4 141034 141534 142034 142534 143034 143534 144034
5.0 141050 141550 142050 142550 143050 143550 144050
6.0 141060 141560 142060 142560 143060 143560 144060
Miniature EMI/RFI shielding gasket for applications with little space Miniature EMI/RFI shielding gasket for applications with little space Holland Shielding Systems B.V. Holland Shielding Systems B.V.
Rated 4.9/5 based on 12 customer reviews
In stock
Product description: A very soft and small EMI/RFI shielding gasket, the miniature EMI/RFI shield can be used in small applications. For EM, RF, LF, HF, EMI, and RFI shielding.

Technical datasheets

To get a quotation for Miniature shield within 24 hours fill in the form below.

Part number
Width
See dimensions table
Height
See dimensions table
Material
Select an option:
F : Conductive foam
R : Conductive rubber
Waterseal
Select an option:
S : Standard waterseal
N : No waterseal
Adhesive
Specify (PSA) if you need conductive self-adhesive.
* Note: The red blocks are required

8250

Shielded connector hoods

4920

Cable grounding clamps

Shielded hats

6500

Clip-on gasket standard shapes

9505

Frameless Honeycomb vents

9540

EMP ventilation panels