Using Mesh foil is the easiest way to create transparent EMI/RFI-shielded windows.
You can shield existing standard displays, glass, acrylic, polycarbonate and plexiglass windows yourself
Mesh foil is a very fine, electrically conductive wire mesh laminated between two layers of scratch-resistant transparent foil. The wires are so fine that they can hardly be seen with the naked eye. The product is very strong but it still bends easily.
It is easy to apply Mesh foil onto glass, acrylic and polycarbonate, either by hand or with a laminator. It can be supplied with or without self-adhesive.
The foil can be made with flying mesh on the sides or around the foil. This means that a part of the very fine wire mesh is not covered in transparent foil. The exposed edges of wire mesh can be used to create an electrical connection with your enclosure. Alternatively a conductive or non-conductive adhesive can be provided along the edges or there can be a silver busbar around the circumference.
Maximum sheet/roll width 1020 mm.
Metallized copper (i.e. copper with a coating of nickel)
It has a dark gray colour and is not shiny.
NOTE: For LCD displays, 17°, 35° or 45° are used typically. We recommend that you request a sample of the product to determine the proper angle of the wire mesh for your application.
Shielding performance up to 100 dB between 10 kHz and 30 GHz.
|Wire diameter (mm)||0.050|
|Nominal aperture (mm)||0.204|
|Light transmission %||64.5|
|These values are measured under laboratory conditions.
In other situations, results may differ; please read our Guarantee.
*Mesh foil 100 OPI is our standard Mesh foil. We can also deliver 250 OPI on request.
9000 series - Standard mesh foil
Please note : These values are measured under laboratory conditions. Results may vary in other situations; please read our Guarantee.
We have mesh foil in standard widths of stock. The standard widths are 10, 20, 30, 40, 50, 100, 200, 250, 500 and 1000 mm. Any other width/size can be produced within days.
If you are interested in ready-made mesh-foil windows, please take a look at our 9700 series EMI/RFI shielded mesh-foil windows. Here the mesh foil is bonded between two layers of glass or plastic, or a single layer of mesh foil is fixed onto one side of a single glass or plastic window.
Please note: the top layer can be affected by acids, for example from people's skin. To protect the conductive layer, you can apply a transparent film or you can have the adhesive side facing out.
Small optical defects are expected to occur with this product. If you require a product that has absolutely no optical defects, please contact us for the "superior selected quality". Do please realize that due to the extreme care needed to manufacture these products, they can be several times more expensive.
To get a quotation for Mesh foil within 24 hours fill in the form below.